|
|||||||||||||||||||||||||||||
|
BodPave 85 Porous Grass Pavers / Paving Grid  Bodpave85 grass pavers / paving grids are a strong interlocking 100% recycled cellular porous plastic paving grid system for grass reinforcement, ground stabilisation & gravel retention for regular trafficked surfaces (pedestrian and vehicles). Bodpave85 porous pavers can be installed with either a grass or gravel filled surface. BodPave® 85 permeable pavers are manufactured in the UK in black, green or natural UV Stabilised 100% recycled HDPE and are strong, chemically inert & non-toxic. Bodpave85 porous paving provide a durable, safe and eco-friendly surface for trafficked areas. APPLICATIONS
•Car Parks / Coach Parks (Grass or Gravel)
•BodPave 85 grass and ground pavers have a load bearing capacity up to 400t/m²
FEATURES The unique design of BodPave85 resists lateral movement, improves traction and allows expansion & contraction whilst promoting optimum grass growth, root protection and surface stabilisation. The open cell structure provides high surface water infiltration and is suitable for source control within a SUDS profile. optimum grass growth deformation & lateral movement connections growth and increase traction cups to optimise root growth increments for curves / obstructions
BodPave permeable paving grids should be installed onto a well prepared, free draining, firm and relatively level sub-base (typically a DoT (GSB Type or reduced fines Type 3) using either Boddingtons 'reduced-dig system' or by employing a full sub-base construction incorporating a Tensar TriAx™ TX160 geogrid reinforcement layer. The ground reinforcement porous paving grids simply connect together and are filled with either a sand:soil rootzone and seeded or turfed for a grass surface, or filled with an angular aggregate for a gravel surface as determined by the application. Construction profiles for each application will be determined by specific site conditions & loading criteria. Detailed design literature and technical support are available to download on the left of this page. Please note that for all BodPave®85 grass paver / gravel paver installations, we strongly recommend that all areas should have sufficient drainage prior to the installation. Failure to ensure this may result in the product not performing as intended.
Installation Guidelines For full installation instructions and guidelines download our Specification, Design & Installation Guidance documents (shown to the left). These downloads are for :
Grassed surfaces : Grass car parks, overflow grass car parks, grass paths, residential lawn parking, grass access routes with a full construction profile
Gravel surfaces : Gravel driveways, grave car parks, gravel coach parks, access roads, caravan standings with a full construction profile
'Reduced Dig' : Where firm or reinforced ground already exists and where lighter applications may be required for both grass and gravel surfaces
For confirmation of the correct construction profile required please contact our office on 01621 874200 to speak with one of our technical team.
Typical Construction Profile
The typical design profile includes reference to a Tensar TriAx TX160 geogrid and a BGT100 Geotextile which are both available from Boddingtons. The information on this page is of an illustrative nature and is supplied without charge. It does not form part of any contract with the user. Final determination of the suitability of any information or material for the use contemplated and the manner of the use is the sole responsibility of the user and the user must assume all risk and liability in connection therewith. Other products that maybe of interest for reinforcing grass surfaces include TurfProtecta Turf Reinforcement Mesh for the general reinforcement of occasional use grassed surfaces, GrassProtecta Grass Protection Mesh for reinforcing existing grassed surfaces used for car parks and access ways and Bodpave® ground stabilisation grids for gravel and driveway reinforcement. |
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
